M4 function

Continue to hold the trigger to the rear: pull the charging handle to the rear and release it three times. Immediate action 15 What is immediate action?

m4 tm

November 20, With the upgrade to the M4 from Burst to Full Auto, there has been some issues with unintended discharge. There is apparently an problem with the Selector switch.

M4 function

Turn in malfunctioning carbine to unit armorer. Along with a new functions check, come a new Immediate Action encase of a weapons malfunction while in operation. The Hammer should drop when trigger is squeezed. Release the trigger. If the hammer does not drop, move the selector switch in either direction. Note: The weapon is NOT considered a code-out or dead-lined if the weapons fails step 2 above. What are the two basic elements of the Sight Picture? Pull the charging handle to the rear and release it. The elevation knob remains flush. Position the apertures 4 so the unmarked aperture is up and the meter aperture is down. Squeeze the trigger and hold it to the rear ; the hammer should fall.

If during any of the three attempts the hammer does not drop when trigger is squeezed, this is a failure. Turn in malfunctioning carbine to unit armorer. Immediate action involves quickly applying a possible correction to reduce a stoppage without performing troubleshooting procedures to determine the actual cause.

Performance Steps 1.

m4 pmi

Taps the forward assist assembly to ensure bolt closure. Rotate the windage knob 7 to align the index mark 8 on the meter aperture with the long center index line on the rear sight assembly.

Functions check m4 usmc

Performance Steps 1. If the hammer drops without squeezing the trigger, this is a failure. Immediate action involves quickly applying a possible correction to reduce a stoppage without performing troubleshooting procedures to determine the actual cause. Please use the weapon with caution and follow proper firing procedures selector in a fully selected firing mode and pointing in a safe direction. Release the trigger. Place the selector lever in the SAFE position. If the hammer drops, repeat the previous step two additional times. Try to place the weapon on safe Remove the magazine Lock the bolt to the rear Place the weapon on safe if not already done 11 Describe the proper procedure for applying immediate action with the M4. Rotate the windage knob 5 to align the index mark 6 on the meter aperture with the long center index line on the rear sight assembly. Continue to hold the trigger to the rear while pulling the charging handle to the rear and releasing the charging handle. The Hammer should drop when trigger is squeezed. Note: The weapon is NOT considered a code-out or dead-lined if the weapons fails step 2 above. Stopped the function check any time the carbine did not function properly and notified the evaluator. Releases the charging handle do not ride it forward. Immediate action 15 What is immediate action?

Share this:. Place the selector lever in the SAFE position.

Rated 5/10 based on 28 review
Download
M4 Functions Check for Full AUTO